RS-232 Interface
HouseLINK-RS allows the user to connect to the BinTrac system using a standard RS­232 protocol. Supports both polling and broadcast.

Analog Output Interface
HouseLINK-AO allows the user to connect to the BinTrac system using a standard analog signal proportional to the weight. The analog signal would be user configurable as a 0‐5 Vdc or 4‐20 mA. The Third Party controller must have an Analog Input available and software to configure the port to display or log weight.

Proportional Output Interface
HouseLINK-FW allows the user to connect to the BinTrac system using a standard proportional mV/V according to the weight. The HouseLINK would essentially simulate analog load cells. The Third Party controller must have a scale amplifier available and software to configure the port to display or log weight.

Digital Output Interface
HouseLINK-WP allows the user to connect to the BinTrac system using a pulsed output according to the amount of weight removed from the scale. This would allow the system to essentially simulate dump scales. The system is user configurable to a weight per pulse. The Third Party controller must have a Digital Input available and software to configure the port to display or log feed usage.

Frequency Output Interface
HouseLINK-WF allows the user to connect to the BinTrac system using a frequency output corresponding to the amount of weight on the scale. The Third Party controller must have a Frequency Input available and software to configure the port to log weight.